Pulling Codes on a 94 Cutlass Ciera 3.1

[Teh Box]

Hey Guys,


I am looking for the procedure to pull trouble codes from my 94 3.1. I am also looking for a list of codes to reference.


Thanks for a link or anything!



Jonathan

[Buick_powa]

It depends on which connector you have for the Diagnostic. Look under the left side of the I/P, you'll se a connector pointing toward your seat this is the diagnostic connector. Take a picture of it and post it there.

[Buick_powa]

http://i217.photobucket.com/albums/cc164/Buick_powa/Diagport.jpg

http://i217.photobucket.com/albums/cc164/Buick_powa/Flashcodes.jpg

http://i217.photobucket.com/albums/cc164/Buick_powa/DiagTroublecodes.jpg

1 character!!!!1 FTW!!!!

[Jr's3800]

This is a 94 .... The connector does not have the Diagnostic Pin and will not flash codes.. You will need a scan tool to read this car..

[Buick_powa]

This is a 94 .... The connector does not have the Diagnostic Pin and will not flash codes.. You will need a scan tool to read this car..

According to AllData and Mitchell It may or may not have pin B in the Scan port. If he does the flashcodes will work if not... Scanner