PDA

View Full Version : L67 or L32



Beastin_cutty43
08-04-2009, 03:19 AM
I'm thinking about swapping my 3300 engine for a L67 or L32 3800 superchargered v6 and was wondering if anybody has tips or anything to help

turbokinetic
08-04-2009, 11:04 PM
Wellcome to the forum!

I've used the 4T65EHD transmission that goes with these engines, and have adapted the CV shafts. There is a thread on that, search 4T65E swap.

You'll want to get a 1999 or older transmission, because the newer ones do not have the casting pads on the case, where our transmission mount attaches. This can be overcome, but it adds one more step of fabrication in an already very tight location!

There is an L67 Ciera, built by Skalor (one of our members) and he has a build thread on it that you can search.

Would look up the threads but have no time at this minute!
David

CuttyC 3.3
08-05-2009, 02:53 AM
I plan on doing the same to my cutty c in the future... If ur lookin on info how to do so you found the right place .. Like Kinetic said above, this is the thread you want http://www.a-body.net/forums/showthread.php?t=110

From what ive learned so far, the series II l67 is the best route because it has the most aftermarket parts for it and it doesnt require as much work to put in as you would think ... Plus there are guys pushing 400hp with these things ..

Anyways go for it man, and if u get a chance to please record your progress and post it so we get to see the transformation,, welcome and happy modding yo!~

BTW,, ur car looks similar to mine ^.^ yeaah!

turbokinetic
08-05-2009, 03:12 AM
Thanks for locating that thread for us!

Beastin_cutty43
08-05-2009, 05:55 AM
thanks guys that really helps and i will