PDA

View Full Version : cruiser won't run



jima
05-22-2010, 11:36 PM
I have a 94 cutlass cruiser with a 3.1 and it will not run. when i spray some starting fluid it runs so i am thinking fuel problem so check fuel preasure and 0 then i used the fuel test lead and 45lbs but i will not run when i do that any help would be great thanks

LordDurock
05-23-2010, 04:30 AM
if you have fuel perrusre then start and run the motor on starting fuild and see if that wont push some gas though the injectors after that ohm the injectors to see if the coil in them is working.....after that take them to a place and have them cleaned

jima
05-23-2010, 01:16 PM
would a fuel relay be the problem i find i strange that i can get fuel preasure useing the fuel pump test lead and it still won't run i can't see every coil on every injectors went bad all at once what tells the injectors to shoot gas

LordDurock
05-23-2010, 02:35 PM
sonds like you may have found the problem......test the relay

jima
05-23-2010, 09:07 PM
witch relay is it there are 5

LordDurock
05-24-2010, 04:30 AM
find out what relay is the fuel pump relay and test that......if that is working fine keep moving down the line to the fuel pump.............some one here should be able to get you a wiring diagram......