PDA

View Full Version : Help wih door pin.



Techfizzle
03-16-2008, 10:55 PM
The door pin and bushing on top of my driver's side were shot and my door hangs 2" lower then it should.:rant: I bought one at advanced auto. The two bushing in the kit were the same size. When I tried to replace the bushings in the door, the top one was too little and it slops around. The hole is not worn out because the old bsuhing was frozen tight in there. So I looked at the package and I noticed it was open before:jawdrop: So I am wondering if some dunce took it back and some dunce just threw in the wrong bushing, or If the door had an oversize bushing in the top.

86euro
03-16-2008, 11:41 PM
There is supposed to be two different sized bushings. If it's the right part, the pin will be a smaller diameter at the pointed end and a larger diameter at the flat end. The flat end gets the larger bushing.